carlcooke602 carlcooke602

12-04-2024
Engineering

contestada

A 20-degree-pressure-angle, 43-tooth spur gear has a diametral pitch equal to 6. Calculate the pitch diameter in mm.

Respuesta :

Otras preguntas

Calculate the percentage of change in the resistance of a wire if its length increased by 20% when it is uniformly stretched: a) 20% b) 40% c) 60% d) 80%

A source produces 15 crests and 15 troughs in 3 seconds. When the second crest is produced, the first is 2 cm away from the source. Calculate: (a) Frequency (b)

Show that the maximum power lost in the load resistance RL occurs when RL = R, that is, when the load resistance matches the internal resistance of the battery.

-4+9y=9 and x-3y=-6 solve using elimination

residential contracting company's software needs are inherently tied to

The graph of y, equals, f, of, xy=f(x) is graphed below. What is the end behavior of f, of, xf(x)?

Determine the force of gravity pulling the sphere down, away from the surface, as a function of... a) Radius of the sphereb) Density of the spherec) Volume of t

Which of the following can be used to verify the identity of a client while establishing a session over TCP port 22? (Select all that apply) a) PIN b) Digital c

Correctional officers sometimes use generalizable answers in response to questions about objectives because _____.a) They want to avoid confrontationb) They lac

A data has the highest value 120 and the lowest value 71. A frequency distribution in descending order with seven classes is to be constructed. What are the lim