dman9230 dman9230
  • 08-11-2022
  • Engineering
contestada

a simply supported beam has a length of 1.2 m. the cross section has a width of 140 mm and height of 240 mm. the weight density of the beam is 5.4 kn/m3 . calculate the maximum permissible value of the load p if (a) the allowable bending stress is 8.5 mpa, and (b) the allowable shear stress is 0.8 mpa.

Respuesta :

Otras preguntas

2 ( 4a - 12 ) + 3a = 6a + 1
What were the 4 major truths Jefferson presented in the declaration of independence?
What's breed of given cat???Check attachment
A snowball is launched horizontally from the top of a building at v = 16.9 m/s. If it lands d = 44 meters from the bottom, how high (in m) was the building?
Your model locomotive is 18 inches long. It is an exact model of a locomotive that is 72 feet long. A window on the locomotive is how many times wider than a wi
10u + 7 = 8 ( 2u - 4 ) - 9
Why did Henry Clay group his resolutions in pairs in the Compromise of 1850?
What's breed of given cat???Check attachment
A snowball is launched horizontally from the top of a building at v = 16.9 m/s. If it lands d = 44 meters from the bottom, how high (in m) was the building?
36 is _______% less than 60?